Cisco Cisco ASR 5000
Exec Mode show Commands (A-C)
▀ show aps
▄ Command Line Interface Reference, StarOS Release 18
4404
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to display APS redundancy configuration, APS card and port status, and APS card and
port statistics. APS is configured at the card level. For details on configuring APS, refer to the Card
Configuration Mode Commands chapter in this reference.
port statistics. APS is configured at the card level. For details on configuring APS, refer to the Card
Configuration Mode Commands chapter in this reference.
Important:
APS is only relevant for the CLC2 and OLC2 line cards supporting SONET/SDH.
Example
The following command displays all available APS configuration information for a specific port 1 on the line
card in slot 27:
card in slot 27:
show aps info 27/1