Cisco Cisco ASR 5000
GGSN Service Configuration Mode Commands
▀ cc profile
▄ Command Line Interface Reference, StarOS Release 18
5222
buckets
number
Default: 4
Specifies the number of statistics container changes due to QoS changes or tariff time that can occur before
an accounting record should be closed.
Specifies the number of statistics container changes due to QoS changes or tariff time that can occur before
an accounting record should be closed.
number
can be configured to an integer from 1 through 4.
interval
time
[downlink
down_octets
uplink
up_octets
| total
total_octets
]
Specifies the normal time duration that must elapse before closing an accounting record provided that any or
all of the following conditions occur:
all of the following conditions occur:
Downlink traffic volume is reached within the time interval
Uplink traffic volume is reached within the time interval
Total traffic volume (up and downlink) is reached within the time interval
time
is measured in seconds and can be configured to an integer from 60 through 40000000.
down_octets
is the downlink traffic volume measured in octets and can be configured to an integer from 0
through 1000000.
up_octets
is the uplink traffic volume measured in octets and can be configured to an integer from 0
through 1000000.
total_octets
is the total traffic volume measured in octets and can be configured to an integer from 0
through 1000000.
prepaid { prohibited | use-rulebase-configuration }
This command enables or disables prepaid for the specified profile index.
Default: N/A
Default: N/A
prohibited
: Disable prepaid for the specified profile index.
use-rulebase-configuration
: Use the prepaid configuration in the rulebase.
sgsns
num_changes
Default: 4
Specifies the number of SGSN changes (such as, inter-SGSN switchovers) resulting in a new RAI (Routing
Area Identity) that can occur before closing an accounting record.
Specifies the number of SGSN changes (such as, inter-SGSN switchovers) resulting in a new RAI (Routing
Area Identity) that can occur before closing an accounting record.
num_changes
can be configured to an integer from 1 through 15.
tariff time1
mins hours
time2
mins hours
time3
mins hours
time4
mins hours
time5
mins hours
time6
mins hours
Specifies time-of-day time values to close the current statistics container (but not necessarily the accounting
record). Six different tariff times may be specified. If less than six times are required, the same time can be
specified multiple times.
record). Six different tariff times may be specified. If less than six times are required, the same time can be
specified multiple times.
Important:
The system assumes that the billing system uses the day/date to determine if the statistics container
represents an actual tariff period.
For each of the different tariff times, the following parameters must be configured:
mins
: The minutes of the hour, an integer value from 0 to 59.
hours
: The hour of the day, an integer value from 0 to 23.