Cisco Cisco ASR 5000
GGSN Service Configuration Mode Commands
▀ sgsn address
▄ Command Line Interface Reference, StarOS Release 18
5274
sgsn address
Configures the SGSNs that this GGSN service is allowed to communicate with.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
sgsn address { { ipv4/ipv6_address | ipv4/ipv6_address/netmask } [ plmn-foreign [ reject-
foreign-subscriber ] | mcc mcc_code mnc mnc_code [ reject-foreign-subscriber ] ] [ rat-
type { GAN | GERAN | HSPA | UTRAN | WLAN } ] [ description description ] [ disable-gtpc-
echo ]
foreign-subscriber ] | mcc mcc_code mnc mnc_code [ reject-foreign-subscriber ] ] [ rat-
type { GAN | GERAN | HSPA | UTRAN | WLAN } ] [ description description ] [ disable-gtpc-
echo ]
no sgsn address { ipv4/ipv6_address | ipv4/ipv6_address/netmask }
no
Removes a specific SGSN from the list or all configured SGSNs.
address
Configures the IP address of the SGSN.
ipv4/ipv6_address
must be specified in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal
notation and can be followed by the subnetmask of the address.
plmn-foreign
Indicates whether or not the SGSN belongs to a foreign public land mobile network (PLMN).
reject-foreign-subscriber
Default: Disabled
Specifies that incoming calls from foreign subscribers are rejected.
Specifies that incoming calls from foreign subscribers are rejected.
mcc
mcc_code
Specifies the mobile country code (MCC) portion of the PLMN’s identifier.
mcc_code
is the PLMN MCC identifier and configured as an integer from 100 through 999.
mnc
mnc_code
Specifies the mobile network code (MNC) portion of the PLMN’s identifier.
mnc_code
is the PLMN MNC identifier and configured as a 2- or 3-digit integer from 00 through 999.