Cisco Cisco ASR 5000
GGSN Service Configuration Mode Commands
sgsn address ▀
Command Line Interface Reference, StarOS Release 18 ▄
5275
rat-type {GAN | GERAN | HSPA | UTRAN | WLAN }
This keyword configures the type of radio access technology.
GAN
: Specifies the Generic Access Network type of Radio Access Technology (RAT).
GERAN
: Specifies the GSM EDGE Radio Access Network type of RAT.
HSPA
: Specifies the High Speed Packet Access type of RAT.
UTRAN
: Specifies the UMTS Terrestrial Radio Access Network type of RAT.
WLAN
: Specifies the Wireless Local Access Network type of RAT.
description
description
Add description field to the SGSN entry in GGSN service.
description
is an alphanumeric string of 1 through 63 characters.
disable-gtpc-echo
Default: Send GTPC Echo messages to unlisted SGSNs.
When this keyword is specified, GTPC echo messages are not sent to unlisted SGSNs.
When this keyword is specified, GTPC echo messages are not sent to unlisted SGSNs.
Usage
Use this command to configure a list of SGSNs that the GGSN service is to communicate with. This
command can be entered multiple times to configure multiple SGSNs.
command can be entered multiple times to configure multiple SGSNs.
Important:
The GGSN only communicates with the SGSNs configured using this command unless a plmn-
policy is enabled to allow communication with unconfigured SGSNs. PLMN policies are configured using the plmn
unlisted-sgsn command.
unlisted-sgsn command.
Example
The following command configures the GGSN to communicate with an SGSN on a foreign PLMN with an IP
address of
address of
192.168.1.100
:
sgsn address 192.168.1.100 plmn-foreign