Cisco Cisco ASR 5000

Page of 9109
  GTPP Server Group Configuration Mode Commands 
gtpp storage-server mode  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
6199 
streaming [ parallel ] 
 
Specifies the use of HDD to store CDRs in case if CGF fails and then stream the CDRs to the CGF when 
CGF is up. Streaming can be done in a First-In-First-Out (FIFO) or parallel mode. Default: streaming (FIFO) 
streaming
: This keyword allows the operator to configure “streaming” mode of operation for GTPP group. 
When this keyword is supplied the CDRs will be stored in following fashion: 
 
When GTPP link is active with CGF, CDRs are sent to a CGF via GTPP and local hard disk is NOT 
used as long as every record is acknowledged in time. 
 
If the GTPP connection is considered to be down, all streaming CDRs will be saved temporarily on the 
local hard disk and once the connection is restored, unacknowledged records will be retrieved from 
the hard disk and sent to the CGF. 
In the streaming mode, when the CGF becomes active, CDRs in HDD are streamed in a First-In-First-Out 
order. In this mode, newly generated CDRs are routed to CGF via HDD. 
parallel
: In this mode, when the CGF becomes active, CDRs in HDD are streamed at slower pace. Newly 
generated CDRs are sent directly to CGF servers along with CDRs streamed from HDD. 
In PARALLEL mode, rate of streaming from HDD will be slow. The maximum requests that can be streamed 
from HDD will be either set to 1 or 25% of the available bandwidth (i.e. max outstanding - outstanding req) if 
it is greater than 1. It is expected that the billing domain should be capable of handling Out-Of-Order CDRs 
in parallel streaming mode. 
Usage 
This command configures whether the CDRs should be stored on the hard disk of the SMC or remotely, on an 
external server. 
Example
 
The following command configures use of a hard disk for storing CDRs. 
gtpp storage-server mode local