Cisco Cisco ASR 5000
HA Service Configuration Mode Commands
▀ gre
▄ Command Line Interface Reference, StarOS Release 18
6258
gre
Configures Generic Routing Encapsulation (GRE) parameters.
Product
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HA Service Configuration
configure > context context_name > ha-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ha-service)#
Syntax
gre { checksum | checksum-verify | reorder-timeout timeout | sequence-mode { none |
reorder } | sequence-numbers }
reorder } | sequence-numbers }
default gre { checksum | checksum-verify | reorder-timeout | sequence-mode | sequence-
numbers }
numbers }
no gre { checksum | checksum-verify | sequence-numbers }
no
Disables the specified functionality.
default
Sets or restores default value assigned for specified parameter.
checksum
Default: disabled
Enables the introduction of the checksum field in outgoing GRE packets.
Enables the introduction of the checksum field in outgoing GRE packets.
checksum-verify
Default: disabled
Enables verification of the GRE checksum (if present) in incoming GRE packets.
Enables verification of the GRE checksum (if present) in incoming GRE packets.
reorder-timeout
timeout
Default: 100
Configures the maximum number of milliseconds to wait before processing reordered out-of-sequence GRE
packets.
Configures the maximum number of milliseconds to wait before processing reordered out-of-sequence GRE
packets.
timeout
must be an integer from 0 through 5000.
sequence-mode { none | reorder }
Default: none
Configures how incoming out-of-sequence GRE packets should be handled.
Configures how incoming out-of-sequence GRE packets should be handled.