Cisco Cisco ASR 5000
HSGW Service Configuration Mode Commands
max-retransmissions ▀
Command Line Interface Reference, StarOS Release 18 ▄
6365
max-retransmissions
Configures the maximum number of times the HSGW service will attempt to communicate with an eAN/PCF before it
marks it as unreachable.
marks it as unreachable.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration
configure > context context_name > hsgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hsgw-service)#
Syntax
max-retransmissions count
default max-retransmissions
default
Resets the maximum number of allowed retransmissions to the default value of 5.
count
Specifies the maximum number of times the HSGW service will attempt to communicate with an eAN/PCF
before it marks it as unreachable.
before it marks it as unreachable.
count
is an integer from 1 through 1000000. Default: 5
Usage
Use this command to limit the number of retransmissions to an eAN/PCF before marking it as unreachable. If
the value configured is reached, the call is dropped.
the value configured is reached, the call is dropped.
Example
The following command configures the maximum number of retransmissions for the HSGW service to
3
:
max-retransmissions 3