Cisco Cisco ASR 5700
APN Configuration Mode Commands
credit-control-client ▀
Command Line Interface Reference, StarOS Release 17 ▄
1315
Important:
This CLI can be changed on the fly. The modified values will be reflected only in the new subscriber
session.
The
no
command removes the override CLI and makes the APN fall back to the configuration specified
through the CLI command “
require ecs credit-control session-mode per-subscriber
”.
Usage
Use this command to configure the credit-control client parameters for this APN.
This configuration should be enabled to report UE’s PLMN, timezone and ULI changes through Event-based-
Gy session. In the event that both Gy Online charging and Gy event reporting are enabled, the P-GW shall
send only CCR-Update requests to the OCS and shall not send CCR-Event requests.
With the inclusion of this keyword
This configuration should be enabled to report UE’s PLMN, timezone and ULI changes through Event-based-
Gy session. In the event that both Gy Online charging and Gy event reporting are enabled, the P-GW shall
send only CCR-Update requests to the OCS and shall not send CCR-Event requests.
With the inclusion of this keyword
override session-mode ...
in 14.1 release, it is possible to
seamlessly change the configuration from bearer level to APN level and vice-versa without requiring a
system reboot.
system reboot.
Example
The following command enables event-based Gy support for the current APN:
credit-control-client event-based-charging