Cisco Cisco ASR 5700

Page of 8994
APN Configuration Mode Commands   
▀  selection-mode 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
1446 
   
selection-mode 
Configures the level of verification that will be used to ensure a mobile station’s subscription to use this APN. 
Product
 
GGSN 
P-GW 
SAEGW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > APN Configuration 
configure > context context_name > apn apn_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-apn)# 
Syntax
 
selection-mode { chosen-by-sgsn | sent-by-ms | subscribed } + 
default selection-mode 
default
 
Sets the default selection mode as “subscribed”. 
chosen-by-sgsn
 
Default: Disabled 
The MS’s subscription will not be verified and the APN will be provided by the SGSN. 
sent-by-ms
 
Default: Disabled 
The MS’s subscription will not be verified and the APN will be provided by the MS. 
subscribed
 
Default: Enabled 
The MS’s subscription will be verified by the SGSN. 
+
 
More than one of the above keywords can be entered within a single command. 
Usage 
Use this command to specify the level of verification that will be used to ensure a MS’s subscription to use 
this APN. This setting must mach the corresponding setting on the SGSN. If the two settings are not identical, 
the GGSN rejects the session with a cause code of 201 (D1H, User authentication failed).