Cisco Cisco ASR 5700
Context Configuration Mode Commands N-R
radius server ▀
Command Line Interface Reference, StarOS Release 17 ▄
2725
max-rate max_rate
Specifies the rate (number of messages per second), at which the authentication messages should be sent to
the RADIUS server.
the RADIUS server.
max_rate
must be an integer from 0 through 1000. Default: 0 (Disabled)
oldports
Sets the UDP communication port to the old default for RADIUS communications to 1645.
port port_number
Specifies the port number to use for communications as an integer from 1 through 65535. Default: 1812
priority priority
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining to which server is to send accounting data.
determining to which server is to send accounting data.
priority
must be an integer from 1 through 1000 where 1 is the highest priority. When configuring two or
more servers with the same priority you will be asked to confirm that you want to do this. If you use the
-
noconfirm
option, you are not asked for confirmation and multiple servers could be assigned the same
priority.
Default: 1000
Default: 1000
probe
Enables probe messages to be sent to the specified RADIUS server.
no-probe
Disables probe messages from being sent to the specified RADIUS server. This is the default behavior.
probe-username username
Specifies the username sent to the RADIUS server to authenticate probe messages.
username
must be an
alphanumeric string of 1 through 127 characters.
probe-password [ encrypted ] password password
The password sent to the RADIUS server to authenticate probe messages.
encrypted
: This keyword is intended only for use by the system while saving configuration scripts. The
system displays the
encrypted
keyword in the configuration file as a flag that the variable following the
password
keyword is the encrypted version of the plain text password. Only the encrypted password is saved
as part of the configuration file.
password password
: Specifies the probe-user password for authentication.
password
must be an
alphanumeric string of 1 through 63 characters.
type { mediation-device | standard }
Specifies the type of transactions the RADIUS server accepts.
mediation-device
: Specifies mediation-device specific AAA transactions. This device is available if you
purchased a transaction control services license. Contact your local sales representative for licensing
information.
information.
standard
: Specifies standard AAA transactions. (Default)