Cisco Cisco ASR 5700
Exec Mode Commands (A-C)
▀ cmp initialize
▄ Command Line Interface Reference, StarOS Release 17
3992
cmp initialize
Triggers an Initial Certification Request (CR) after generating a public and private key pair, as well as an X.509
certificate to be included in the CR. This is a Certificate Management Protocol v2 command.
certificate to be included in the CR. This is a Certificate Management Protocol v2 command.
Product
All products supporting IPSec CMPv2 features
Important:
This command appears in the CLI for this release. However, it has not been qualified for use with
any current Cisco StarOS gateway products.
Privilege
Security Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
cmp intialize modulus mod_type cert-name name subject-name “subject_string” ca-psk key
ca-root ca_name ca-url url
ca-root ca_name ca-url url
modulus
mod_type
Specifies the modulus of the generated certificate.
mod_type
is one of the following integers: 1024, 2048,
4096 or 512.
cert-name
name
Specifies the name of the newly obtained certificate which also serves as the filename to be stored on /flash
disk.
disk.
name
is an alphanumeric string of 1 through 129 characters.
subject-name
“subject_string”
Specifies the subject string of the certificate in double quotation marks.
“subject_string”
is an
alphanumeric string of 1 through 256 characters.
ca-psk
key
Specifies the Pre-Shard Key provided by the CA server for CMPv2 operation.
key
is an alphanumeric string
of 1 through 129 characters.
ca-root
ca_name
Specifies the root certificate of the CA server.
ca_name
is an alphanumeric string of 1 through 129
characters.