Cisco Cisco ASR 5700
Exec Mode Commands (D-S)
debug bfd ▀
Command Line Interface Reference, StarOS Release 17 ▄
4013
debug bfd
Enables or disables the debug options for Bidirectional Forwarding Detection BFD) debugging. If logging is enabled,
results are sent to the logging system.
results are sent to the logging system.
Product
All
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[ no ] debug bfd { all | events ipc-error | ipc-events | nsm | packet | session }
no
Indicates the IP debugging is to be disabled for the IP interfaces/function specified.
bfd | interface name | route
Specifies which IP interfaces/function to debug.
all
: enables debug for all BFD items.
events
: enables debug for BFD events.
ipc-error
: enables debug for BFD Inter-process communication (IPC) errors.
ipc-events
: enables debug for BFD Inter-process communication (IPC) events.
nsm
: enables debug for BFD Network Service Manager messages.
packet
: enables debug for BFD packets.
session
: enables debug for BFD sessions.
Usage
The debug bfd command is valuable when troubleshooting network problems with BFD-enabled BGP
routers. The debugging is stopped by using the
routers. The debugging is stopped by using the
no
keyword.
Caution:
Issuing this command could negatively impact system performance depending on system
configuration and/or loading.
Example
The following commands enable/disable debugging for BFD.
debug bfdno debug bfd