Cisco Cisco ASR 5700
Exec Mode Commands (D-S)
session trace ▀
Command Line Interface Reference, StarOS Release 17 ▄
4165
imei id
Specifies the International Mobile Equipment Identification number of the subscriber UE.
id
must be the 8-
digit TAC (Type Allocation Code) and 6-digit serial number. Only the first 14 digits of the IMEI/IMEISV are
used to find the equipment ID.
used to find the equipment ID.
imsi id
Specifies the International Mobile Subscriber Identification (IMSI).
id
must be the 3-digit MCC (Mobile
Country Code), 2- or 3- digit MNC (Mobile Network Code), and the MSIN (Mobile Subscriber Identification
Number). The total should not exceed 15 digits.
Number). The total should not exceed 15 digits.
interface { all |
interface }
Specifies the interfaces where the session trace application will collect data.
all
: Specifies all interfaces associated with the selected network element
interface
: Specifies the interface type where the session trace application will collect trace data. The
following interfaces are applicable for each network element type:
GGSN:
GGSN:
gi
: Specifies that the interface where the trace will be performed is the Gi interface between the GGSN
and RADIUS server.
gmb
: Specifies that the interface where the trace will be performed is the Gmb interface between the
GGSN and BM-SC.
gn
: Specifies that the interface where the trace will be performed is the Gn interface between the GGSN
and the SGSN.
gx
: Specifies that the interface where the trace will be performed is the Gx interface between the GGSN
and PCRF.
gy
: Specifies that the interface where the trace will be performed is the Gy interface between the GGSN
and OCS.
MME:
s1mme
: Specifies that the interface where the trace will be performed is the S1-MME interface between
the MME and the eNodeB.
s3
: Specifies that the interface where the trace will be performed is the S3 interface between the MME
and an SGSN.
s6a
: Specifies that the interface where the trace will be performed is the S6a interface between the
MME and the HSS.
s10
: Specifies that the interface where the trace will be performed is the S10 interface between the
MME and another MME.
s11
: Specifies that the interface where the trace will be performed is the S11 interface between the
MME and the S-GW.
s13
: Specifies that the interface where the trace will be performed is the S13 interface between the
MME and the EIR.
P-GW:
gx
: Specifies that the interface where the trace will be performed is the Gx interface between the P-GW
and the PCRF.
gy
: Specifies that the interface where the trace will be performed is the Gy interface between the P-GW
and OCS.