Cisco Cisco ASR 5700
Exec Mode show Commands (A-C)
▀ show active-charging sessions
▄ Command Line Interface Reference, StarOS Release 17
4310
>
bytes
or
greater-than
bytes
: Specifies filtering of maximum flows that is greater than the specified number of
bytes.
=
bytes
or
equal-to
bytes
: Specifies filtering of maximum flows that is equal to the specified number of bytes.
bytes
must be an integer from 0 through 18446744073709551615.
msid
Displays active charging session information for a specific subscriber’s Mobile Station Identification (MSID)
number.
number.
msisdn
msisdn_number
Displays active charging session information for a specific subscriber’s Mobile Station Integrated Services
Digital Network (MSISDN) number.
Digital Network (MSISDN) number.
msisdn_number
must be an integer with a maximum of 15 digits.
ipv4
Displays active charging session information with IPv4 Firewall enabled/disabled.
ipv6
Displays active charging session information with IPv6 Firewall enabled/disabled.
nat { not-required | required [ nat-realm nat_realm_name ] } [ ipv4 | ipv6 ]
Displays session information for sessions with NAT required or not required, as specified.
nat-realm nat_realm_name
specifies the name of a NAT realm as an alphanumeric string of 1 through
63 characters.
ipv4
: Displays active-charging sessions for which NAT44 processing is required.
ipv6
: Displays active-charging sessions for which NAT64 processing is required.
rulebase
Displays information for a rulebase that is configured in an active charging session.
rx-data
Displays the bytes received in the session.
session-id
Displays detailed session information for a specific session identification.
transrating
Displays the transrating sessions.
tx-data
Displays the bytes sent in the session.
type
Displays session information for specified DNS application type(s).
dns