Cisco Cisco ASR 5700
Exec Mode show Commands (D-G)
▀ show dhcpv6-service
▄ Command Line Interface Reference, StarOS Release 17
4502
show dhcpv6-service
Displays service information and configuration counters for a specific or all Dynamic Host Configuration Protocol IPv6
(DHCPv6) services.
(DHCPv6) services.
Product
GGSN
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show dhcpv6-service [ all | name svc_name ] | { grep grep_options | more }
all
Displays configuration information and counters for all DHCPv6 services.
name svc_name
Displays configuration information and counters for an existing DHCPv6 service specified as an
alphanumeric string of 1 through 63 characters.
alphanumeric string of 1 through 63 characters.
| { grep
grep_options
| more }
Pipes (sends) the output of this command to a specified command. You must specify a command to which the
output of this command will be sent.
For details on the usage of
output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.
Usage
Use this command to display configuration information and counters for one or all DHCPv6 services.
Example
The following command displays all DHCPv6 services:
show dhcpv6-service all