Cisco Cisco ASR 5700
IPv6 ACL Configuration Mode Commands
▀ redirect nexthop (by IP packets)
▄ Command Line Interface Reference, StarOS Release 17
6716
context context_id
The context identification number of the context to which packets are redirected. At the executive mode
prompt, use the
prompt, use the
show context all
command to display context names and context IDs.
interface interface_name
The name of the logical interface to which the packets should be redirected.
interface_name
must be an
alphanumeric string from 1 through 79 characters.
log
Default: packets are not logged.
Indicates all packets which match the redirect are to be logged.
Indicates all packets which match the redirect are to be logged.
source_address
The IP address(es) form which the packet originated.
This option is used to filter all packets from a specific IP address or a group of IP addresses.
When specifying a group of addresses, the initial address is configured using this option. The range can then
be configured using the
This option is used to filter all packets from a specific IP address or a group of IP addresses.
When specifying a group of addresses, the initial address is configured using this option. The range can then
be configured using the
source_wildcard
parameter.
source_wildcard
This option is used in conjunction with the
source_address
option to specify a group of addresses for
which packets are to be filtered.
The mask must be entered as a complement:
The mask must be entered as a complement:
Zero-bits in this parameter mean that the corresponding bits configured for the
source_address
parameter must be identical.
One-bits in this parameter mean that the corresponding bits configured for the
source_address
parameter must be ignored.
Important:
The mask must contain a contiguous set of one-bits from the least significant bit (LSB).
any
Specifies that the rule applies to all packets.
host
Specifies that the rule applies to a specific host as determined by its IP address.
source_host_address
The IP address of the source host to filter against expressed in IPv6 colon-separated-hexadecimal notation.
dest_host_address
The IP address of the destination host to filter against expressed in IPv6 colon-separated-hexadecimal
notation.
notation.
dest_address
The IP address(es) to which the packet is to be sent.
This option is used to filter all packets to a specific IP address or a group of IP addresses.
This option is used to filter all packets to a specific IP address or a group of IP addresses.