Cisco Cisco ASR 5700
ACS Rulebase Configuration Mode Commands
ruledef-parsing ▀
Command Line Interface Reference, StarOS Release 17 ▄
761
ruledef-parsing
This command allows you to configure whether to consider or ignore the port number embedded in the application
header (for example, the ":80" in www.star.com:80) when comparing the ruledef expressions to the packet contents.
header (for example, the ":80" in www.star.com:80) when comparing the ruledef expressions to the packet contents.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-rule-base)#
Syntax
[ no ] ruledef-parsing ignore-port-numbers-embedded-in-application-headers analyzers {
http rtsp sip wsp }
http rtsp sip wsp }
default ruledef-parsing
no
If previously configured, deletes the ruledef-parsing configuration from the current rulebase.
default
Configures this command with its default setting.
Default: Same as
Default: Same as
no ruledef-parsing ignore-port-numbers-embedded-in-application-
headers analyzers { http rstp sip wsp }
— not ignoring port numbers that are embedded in
application headers.
ignore-port-numbers-embedded-in-application-headers analyzers { http rtsp sip wsp
}
}
Ignore the port numbers present in application header.
Specifies analyzers for which the port number must be ignored.
Specifies analyzers for which the port number must be ignored.
Usage
Use this command to make the HTTP, RTSP, SIP, and WSP analyzer ignore port numbers embedded in
application headers.
application headers.
Example
The following command makes the HTTP analyzer in the current rulebase ignore port numbers embedded in
application headers:
application headers:
ruledef-parsing ignore-port-numbers-embedded-in-application-headers
analyzers http
analyzers http