Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
•
—Complete this procedure as needed to suppress
reported alarms at the port, card, or node level and to disable the suppress command to resume normal alarm reporting.
•
NTP-G72 Provision External Alarms and Controls on the Alarm Interface Controller-International Card, on page 52
—Complete
this procedure as needed to provision external alarms and controls on the Alarm Interface Controller–International (AIC-I) card.
•
—Complete
this procedure as needed to provision external alarms and controls on the TNC, TNCE, TSC, or TSCE card.
NTP-G63 Document Existing Provisioning
Use this procedure to document existing provisioning by printing or exporting card,
node, or network CTC information. You can export information as delineated text
files to other applications. This procedure is useful for network record keeping and
troubleshooting.
node, or network CTC information. You can export information as delineated text
files to other applications. This procedure is useful for network record keeping and
troubleshooting.
Purpose
A printer connected to the CTC computer by a direct or network connection
Tools/Equipment
• “Turn Up a Node” chapter in the Cisco ONS 15454 DWDM Network
Configuration Guide .
• "DLP-G46 Log into CTC" task in the "
document.
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Retrieve or higher
Security Level
Procedure
Step 1
As needed, complete the
DLP-G113 Print CTC Data, on page 21
task.
Step 2
As needed, complete the
DLP-G114 Export CTC Data, on page 23
task.
Stop. You have completed this procedure.
DLP-G113 Print CTC Data
This task prints CTC card, node, or network data in graphical
or tabular format on a Windows-provisioned printer.
or tabular format on a Windows-provisioned printer.
Purpose
21