Cisco CiscoWork QoS Policy Manager 4.1.2 User Guide
Chapter 5 Configuring QoS for IP Telephony
Configuring QoS Using the IP Telephony Wizard
5-18
User Guide for QoS Policy Manager 3.0
78-12542-01
Step 3
Click Next.
•
If the Display Configuration Info. check box is selected, the Configuration
Info page appears. After reviewing the assignments summary, click Next.
Info page appears. After reviewing the assignments summary, click Next.
The voice policy groups and your Voice VLAN assignments will be saved, and the
next configuration step of the wizard appears (
next configuration step of the wizard appears (
).
Related Topics
•
•
•
•
Selecting the Switch to the WAN Router Connections
In this step, the wizard sets QoS for the distribution switch interfaces to the WAN
router (network point 7 in
router (network point 7 in
).
Because traffic coming from the WAN side is already classified, the QoS
configuration for the distribution switch interface to the router will be to trust the
layer 3 DSCP bits.
configuration for the distribution switch interface to the router will be to trust the
layer 3 DSCP bits.
Procedure
Step 1
Select the switch interface on which to configure QoS for the distribution switch
connection to the WAN router, by selecting the check box next to the appropriate
port in the selection table.
connection to the WAN router, by selecting the check box next to the appropriate
port in the selection table.
For more information about the columns in this table, see