Cisco CiscoWork QoS Policy Manager 4.1.2 User Guide

Page of 644
 
6-51
User Guide for QoS Policy Manager 3.0
78-12542-01
Chapter 6      Working with Policy Groups and Policies
More Information on Policy Configuration
QoS Configuration on Network Element Types
Policy groups can be assigned to only one type of network element. For some 
devices, you will need to define several policy groups to consolidate the QoS 
configuration on the device.
To create a complete QoS configuration for a single type of network element, you 
might need to define more than one policy group. For example, when configuring 
FRTS policies, and when configuring VLAN policies. 
There are other cases, where you might need two policy groups. For example, you 
configure markdown in policing policies on Catalyst ports at the port level, but to 
change the default markdown mapping values, you must define an additional 
policy group at the device level.
This section provides tables listing the types of QoS configurations that can be 
configured for each network element type, for different device models:
Table 6-1
Types of QoS Configurations on IOS Devices
Device Model
Network Element Type 
Device
Interface
VC
DLCI
VLAN
1600 No 
QoS 
configuration 
at device level.
Scheduling
Properties
Actions
Not available
Scheduling 
Properties 
Actions 
Not available
1720 No 
QoS 
configuration 
at device level.
Scheduling 
Properties,   
Actions 
Not available
Scheduling 
Properties 
Actions 
Not available
1750 No 
QoS 
configuration 
at device level.
Scheduling
Properties
Actions 
Not available
Scheduling
Properties:
Actions 
Not available