Cisco CiscoWork QoS Policy Manager 4.1.2 User Guide
F-21
User Guide for QoS Policy Manager 3.0
78-12542-01
Appendix F CLI Command Reference for QPM Actions
Configuration on Catalyst Switches with Supervisor IOS
When you configure policing policies for a Catalyst 2950 with Supervisor IOS,
QPM uses this command sequence to configure the device:
QPM uses this command sequence to configure the device:
1.
policy-map policy-map-name
class classname
a.
police rate bc [exceed-action {dscp dscp | drop}]
b.
police aggregate policer-name
If you define an aggregate policing policy, the following command is used:
•
mls qos aggregate-policer policer-name rate bc be [pir pir] conform-action
{set-prec-transmit | set-dscp-transmit | drop} exceed-action {transmit |
policed-dscp-transmit | drop} [violate-action {transmit |
policed-dscp-transmit | drop}]
{set-prec-transmit | set-dscp-transmit | drop} exceed-action {transmit |
policed-dscp-transmit | drop} [violate-action {transmit |
policed-dscp-transmit | drop}]
Queuing on Catalyst Switches with Supervisor IOS
When you configure 2Q2T or 1P2Q2T queuing for Catalyst 6000 switches with
Supervisor IOS, QPM uses the following command sequence:
Supervisor IOS, QPM uses the following command sequence:
1.
mls qos
2.
interface interfacename
3.
mls qos
4.
wrr-queue cos-map queue-number threshold-number cos-list
5.
priority-queue cos-map queue-id cos-list
6.
wrr-queue queue-limit queue-ratio-1 queue-ratio-2
7.
wrr-queue bandwidth queue-weight-1 queue-weight-2
8.
wrr-queue threshold queue-number threshold-1 threshold-2
9.
wrr-queue random-detect max-threshold queue-number threshold-1
threshold-2
threshold-2
When you configure 4Q2T queuing for Catalyst 3550 switches with Supervisor
IOS, QPM uses the following command sequence:
IOS, QPM uses the following command sequence:
1.
wrr-queue cos-map queue-number cos-list
2.
priority-queue out
3.
wrr-queue dscp-map threshold-id dscp-list