Cisco Cisco Multicast Manager 3.1 Information Guide
8
Device Instrumentation Requirements for Cisco Multicast Manager, 3.1
OL-23601-01
CLI Support
Command Descriptions
provides a short description of each command that CMM uses.
MVPN Diagnostics VRF
Update
Update
Menu Location: Diagnostics >
Tools > MVPN
Tools > MVPN
Used to populate Provider Edge
(PE) Device Configurations with
Device Name URL.
(PE) Device Configurations with
Device Name URL.
Use: Updates MVPN information
when user clicks the device name
URL.
when user clicks the device name
URL.
Note
The commands used here
are also used to update
VRF information during
CMM discovery.
are also used to update
VRF information during
CMM discovery.
CLI commands for IOS:
•
sh ip multicast vrf <vrfName>
•
sh ip vrf interfaces <vrfName>
•
sh run vrf <vrfName>
CLI commands for IOS-XR:
•
sh run multicast-routing
•
sh vrf <vrfName> detail
Explicit User Tracking
Diagnostics
Diagnostics
Menu Location: Diagnostics >
Tools > Explicit User Tracking
Tools > Explicit User Tracking
Use: To see user information.
CLI commands:
•
sh ip igmp groups | include Vlan
•
sh ip igmp snooping explicit-tracking vlan <vlan_no>
Table 5
CMM Functionality Requiring Telnet or SSH Access (continued)
Functionality
Location and Usage
CLI Commands
Table 6
CLI Commands Used by CMM—Command Descriptions
Command
Description
sh cam dyn
The show cam dynamic (sh cam dyn) command shows dynamic entries in the
Content Addressable Memory (CAM) table on Catalyst switches.
Content Addressable Memory (CAM) table on Catalyst switches.
sh ether sum
Displays Ethernet information for an interface.
sh fab swi
Display information about the crossbar fabric on an interface and shows the
module switching mode.
module switching mode.
sh ip igmp snooping explicit-tracking vlan
<vlan_no>.
<vlan_no>.
Displays the information about the explicit host-tracking status for the
specified VLAN on the host.
specified VLAN on the host.
sh ip igmp snooping groups
Displays the Internet Group Management Protocol (IGMP) snooping
multicast table for the switch or multicast information for the switch. For
each group, the command displays the Vlan, Group, Version, and a Port List.
multicast table for the switch or multicast information for the switch. For
each group, the command displays the Vlan, Group, Version, and a Port List.
sh ip mroute
Displaya the contents of the IP multicast routing table.
sh ip mroute active
Displays the rate that active sources in the multicast routing table are sending
to multicast groups.
to multicast groups.
sh ip mroute <group> <source> count
Displays IP multicast routing statistics about the specified group and source,
including number of packets, packets per second, average packet size, and
bits per second.
including number of packets, packets per second, average packet size, and
bits per second.
sh ip multicast vrf <vrf_name>
Displays general information about IP multicast, for the specified to the
Multicast Virtual Private Network (MVPN) routing and forwarding (MVRF)
instance specified in the vrf_name argument.
Multicast Virtual Private Network (MVPN) routing and forwarding (MVRF)
instance specified in the vrf_name argument.