Manualsbrain.com
  1. Manuals
  2. Brands
  3. Cisco
  4. Cisco Evolved Programmable Network Manager 2.0
  5. Installation Guide

Cisco Cisco Evolved Programmable Network Manager 2.0 Installation Guide

Download
Page of 38
22
      
Step 7
Enter the Cisco IMC password. If you leave the Username and Password fields blank, the system uses the following 
default login credentials: 
•
Username: admin 
•
Password: password 
Step 8
When a prompt is returned, press F10 to save the configuration. 
Step 9
Update the following fields as specified: 
•
NIC mode—Select Dedicated. 
•
IP (Basic)—Select IPV4. 
•
DHCP—Disable DHCP if enabled. 
•
CIMC IP—Enter the IP address of the Cisco IMC. 
•
Prefix/Subnet—Enter the subnet of the Cisco IMC. 
•
Gateway—Enter the gateway address. 
•
Pref DNS Server—Enter the preferred DNS server address. 
•
NIC Redundancy—Null. 
Step 10
Press F1 to view the additional settings. 
Step 11
In the Additional Settings window, update the following fields: 
•
Hostname—Enter the Cisco IMC hostname. 
•
Dynamic DNS—Disable. 
•
Enter the admin password. If you leave the Password field blank, the default password is password. 
Step 12
Press F10 to save the settings. 
Step 13
Open a browser and enter the following URL: 
https://Cisco IMC_IP_address
Where Cisco IMC_IP_address is the Cisco IMC IP address that you entered in 
Step 14
Log in to the Cisco IMC using the credentials that you entered 
What To Do Next
Proceed to 
.
Configure the Bare Metal Cisco UCS Server
Procedure
Step 1
From the left sidebar of the Cisco IMC web interface, click the Storage tab, and then click the Cisco 12G SAS Modular 
Raid Controller (SLOT-HBA) link. 
Step 2
In the Cisco 12G SAS Modular Raid Controller (SLOT-HBA) pane, click the Controller Info tab. 
Step 3
In the Actions area, click Create Virtual Drive from the Unused Physical Drives link. 
Step 4
In the Create Virtual Drive from Unused Physical Drives window, choose 10 from the RAID Level drop-down list. 
Step 5
In the Create Drive Groups area, select the physical drives listed under the Physical Drives area, then add them to the 
Drive Groups. 
Step 6
In the Virtual Drive Properties area, choose Write Back Good BBU from the Write Policy drop-down list. 
Step 7
Complete the required fields, then click Create Virtual Drive. 
Step 8
Click the Virtual Drive Info tab. 
Step 9
Click Initialize. A popup window is displayed. 
Step 10
Click Initialize VD.