Manualsbrain.com
  1. Manuals
  2. Brands
  3. Cisco
  4. Cisco Evolved Programmable Network Manager 2.0
  5. Installation Guide

Cisco Cisco Evolved Programmable Network Manager 2.0 Installation Guide

Download
Page of 38
23
      
Step 11
Follow the steps below to enable Auto-Negotiation to speed up the installation: 
a.
From the left sidebar, click the Admin tab. 
b.
Click Network. 
c.
In the Network pane, click the Network Settings tab. 
d.
In the Port Properties area, check the Auto Negotiation check box. 
e.
Click Save Changes. 
Step 12
From the left sidebar, click the Admin tab. 
Step 13
In the Utilities pane, click the Actions area, then click Reboot Cisco IMC. 
Step 14
Click OK. 
Step 15
When prompted, press F2 to access the BIOS setup menu. The Aptio Setup Utility window appears, which provides the 
BIOS setup menu options. 
Step 16
In the Aptio Setup Utility window, click the Boot Options tab. 
Step 17
Enable UEFI Boot options, and then choose Bus PCI RAID Adapter for Boot Option #1. 
Step 18
Press F10 to save and exit.
The system is now prepared to boot from RAID. (For the first boot, however, you must do it from a remote virtual 
CD/DVD which is be mapped to the ISO image. That process is described in 
.)
What To Do Next
Proceed to 
Install Cisco EPN Manager from an ISO Image
Procedure
Step 1
Power up the Cisco UCS Server. 
Step 2
Log in to Cisco IMC Server using the credentials you entered in 
 in 
.
Step 3
Choose Server > Summary, then click Launch KVM Console to open the console (in a separate window).
Step 4
In the KVM Console window, choose Virtual Media > Activate Virtual Devices. A popup window is displayed. 
Step 5
Click the Accept this Session radio button, then click Apply. 
Step 6
In the KVM Console window, choose Virtual Media > Map CD/DVD. 
Step 7
In the Virtual Media - Map CD/DVD window, select the ISO file, then click Map Device. 
Step 8
In the KVM Console window, choose Virtual Media and verify that the ISO filename .iso Mapped to CD/DVD option 
is displayed. 
Step 9
Reboot the server by choosing Power > Reset System (warm boot). 
Step 10
Enter the boot menu by pressing F6. 
Step 11
From the boot device selection window, select Cisco vKVM-Mapped vDVD1.22, then press Enter. 
Step 12
For the boot option, enter 1 for Keyboard/Monitor or 2 for Serial Console, then press Enter. The Cisco EPN Manager 
installer extracts the content. 
Step 13
After the extraction is complete, at the localhost login prompt, enter setup. 
Step 14
Go to 
 in 
 to complete the installation.