Cisco Headend System Release 2.5 User Guide
78-738186-01 Rev B
signonCount Utility
2-3
Review the signonCount Utility Help Window
Introduction
Before you use the signonCount utility on your system, Cisco recommends that you
review the information on the utility’s help window. The information on the help
window may supplement the information and procedures in this chapter.
Reviewing the signonCount Utility Help Window
Follow these instructions to review the signonCount utility help window.
1.
Open an xterm window on the DNCS and then maximize the window.
Note: The help window for the signonCount utility is large.
Note: The help window for the signonCount utility is large.
2.
Type signonCount -h and then press Enter.
Result: The help window for the signonCount utility appears.
Result: The help window for the signonCount utility appears.
3.
Press the Spacebar as often as necessary to page through the help window.