Cisco Headend System Release 2.5 Installation Guide
4-18
SR 2.5 and SR 3.5 Common Upgrade Procedures
78-738190-01 Rev B
Disconnect the UniPack From the Application Server
Disconnecting the UniPack from the Application Server
Follow these instructions to shut down the Application Server and to then
disconnect the UniPack
1.
Type /usr/sbin/shutdown –y –g0 –i0 and then press Enter.
Result: The Application Server shuts down and an ok prompt appears.
Result: The Application Server shuts down and an ok prompt appears.
2.
Turn off power to the Application Server.
3.
Turn off power to the UniPack.
4.
Disconnect the UniPack from the Application Server.
5.
Turn on power to the Application Server.
Result: A series of messages scroll across the screen as the Application Server
Result: A series of messages scroll across the screen as the Application Server
boots.
6.
When the message Boot device: disk file and args appear, press the Stop and
a keys simultaneously.
Result: An ok prompt appears.
Result: An ok prompt appears.
7.
Type boot –r and then press Enter.
Result: The system reboots and the CDE window opens.
Result: The system reboots and the CDE window opens.
8.
Log into the Application Server CDE as dncs user.
9.
Go to Check the SR 2.5 and SR 3.5 Installed Components Version, next in
this chapter.