Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide
Chapter 3 Installation
86
OL-29643-02
Note: If using the alternate (right-side) fiber connection port, you have to route
the fibers through the fiber channel in the fiber track located underneath the
unused fiber holders.
5 Hold the connector body to prevent rotation of the connector or fibers.
6 Carefully thread the 5/8-inch threaded nut into the threaded hole of the fiber
port. Tighten to 20 to 25 ft-lbs (27.1 to 33.9 Nm).
7 Firmly tighten the rotational nut against the 5/8-inch threaded nut.
8 Push heat shrink tubing over the connector and fiber port and shrink in place.
9 Identify individual fibers according to their color code and determine to which
8 Push heat shrink tubing over the connector and fiber port and shrink in place.
9 Identify individual fibers according to their color code and determine to which