Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Using the TEST Key Menus
78-545617-01 Rev F
27
Using the TEST Key Menus
Introduction
The TEST key menus allow you to access the TEST menus. You can start and stop
tests by pressing the ENTER key.
Reading the TEST Key Menus
Provides an interactive test of the buttons on the front
panel
Tests the LCD display
Tests the integrity of the diagnostic port on the digital
board
Tests the integrity of the ATM-25 port
Tests the Reed-Solomon coding system
Tests the integrity of the RAM on the CPU board
Tests the integrity of the ROM on the CPU board
Searches and displays the DHCT frequency of the
cable plant
Searches the DHCT power levels of the cable plant
and displays the proper QPSK demodulator RF Input
level
Performs a diagnostic check (should only be
Performs a diagnostic check (should only be
performed by a service engineer)