Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide
3
Before You Begin
Before You Begin
Before you start the upgrade procedure, make sure that you have all of the
components, tools, and equipment available.
components, tools, and equipment available.
Components Required to Make the Split Change
Note: Kit part numbers differ depending on the desired final split. Upgrade kit part
number GS7K-SKT-1.2G-85= supports changing a 1.2 GHz GS7000 launch amplifier
to an 85/105 MHz split.
number GS7K-SKT-1.2G-85= supports changing a 1.2 GHz GS7000 launch amplifier
to an 85/105 MHz split.
Each upgrade kit supports changing the frequency split for ten 1 . 2 G H z GS7000
launch amplifiers and will contain the following components Low Pass Filter Trim
Module 40 ea
launch amplifiers and will contain the following components Low Pass Filter Trim
Module 40 ea
High Pass Filter Trim Module 40 ea
Non-mirrored Diplex Filter Module 20 ea
Mirrored Diplex Filter Module 20 ea
Tools and Equipment Required to Make the Split Change
1/2-inch socket driver
Flat-head screwdriver
Phillips screwdriver
Torque screwdriver
Torque wrench with 1/2-inch socket
Tools and Equipment Required for Optional Performance Verification
following the Split Change
following the Split Change
AC power source
Test GS7000 Node housing and network analyzer or stealth meter
Cable adapter, part number GS7K-SPLKT-CBL