Cisco Headend System Release 2.5 Installation Guide
Create, Modify, or Delete Hubs
4017650 Rev C
27
Results:
The system saves the new hub information in the DNCS database and closes
the Set Up Hub window.
the Set Up Hub window.
The Hub List window updates to include the new hub information.
7 Change your network map to reflect these changes.
8 When finished, send a copy of your updated network map to the representative
8 When finished, send a copy of your updated network map to the representative
who handles your account.
9 Do you want to delete a hub?
If yes, go to Deleting a Hub, next in this section.
If no, go to Set Up MPEG Sources (on page 34).
Deleting a Hub
You may want to delete a hub because you are no longer using it, or because you
need to redefine the headend or hub ID.
need to redefine the headend or hub ID.
Important: Before you can delete a hub, you must delete all of the network elements
that are associated with it, including any OIT bridges. In addition, you must have
your network map readily available. If you cannot locate your network map, refer to
Customer Support (on page 190).
1 Are there any node sets associated with this hub?
that are associated with it, including any OIT bridges. In addition, you must have
your network map readily available. If you cannot locate your network map, refer to
Customer Support (on page 190).
1 Are there any node sets associated with this hub?
If yes, delete those node sets first. When finished, return to this procedure.
If no, go to step 2.
2 From the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
3 Click Hub. The Hub List window opens.
4 Click once on the row containing the hub you want to delete.
5 Click File then choose Delete Selected Hub. A confirmation window opens.
6 Click Yes. The confirmation window closes and the system removes the hub
4 Click once on the row containing the hub you want to delete.
5 Click File then choose Delete Selected Hub. A confirmation window opens.
6 Click Yes. The confirmation window closes and the system removes the hub
information from the DNCS database and from the Hub List window.
7 Delete the hub from your network map.
8 Click File and choose Close to close the Hub List window and return to the
8 Click File and choose Close to close the Hub List window and return to the
DNCS Administrative Console.
9 Do you need to delete another hub?
If yes, repeat steps 1 through 8. When finished go to Set Up MPEG Sources
(on page 34).
(on page 34).
If no, continue making any other changes that you need to make to your
network. When finished, send a copy of your updated network map to the
representative who handles your account. Go to Set Up MPEG Sources (on
page 34).
network. When finished, send a copy of your updated network map to the
representative who handles your account. Go to Set Up MPEG Sources (on
page 34).