Cisco Headend System Release 2.5 Installation Guide
Create, Modify, or Delete Hubs
4017650 Rev C
25
5 Click File then choose Delete Selected Hub. A confirmation window opens.
6 Click Yes. The confirmation window closes and the system removes the hub
6 Click Yes. The confirmation window closes and the system removes the hub
information from the DNCS database and from the Hub List window.
7 Delete the hub from your network map.
8 Click File and choose Close to close the Hub List window and return to the
8 Click File and choose Close to close the Hub List window and return to the
DNCS Administrative Console.
9 Do you need to delete another hub?
If yes, repeat steps 1 through 8. When finished go to Set Up MPEG Sources
(on page 34).
(on page 34).
If no, continue making any other changes that you need to make to your
network. When finished, send a copy of your updated network map to the
representative who handles your account. Go to Set Up MPEG Sources (on
page 34).
network. When finished, send a copy of your updated network map to the
representative who handles your account. Go to Set Up MPEG Sources (on
page 34).
Configuration Two: Distributed DNCS Disabled and Network Binding Enabled
Creating New Hubs
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
2 Click Hub. The Hub List window opens.
3 From the Hub List, select File and choose New. The Set Up Hub window opens.