Cisco Headend System Release 2.7 Installation Guide

Page of 54
 
 
Known Issues 
4022900 Rev C 
13 
 
CR 95987: Dual Port GQAM in an SR 4.3 SDV-Only Environment Experiences 
RPC Communication Failures 
When GQAM software version 4.2.1 is installed on a dual port GQAM, the GQAM 
will experience an RPC communication failure and be unable to communicate with 
the DNCS, the SDV Server, or the USRM when used only for SDV services in an  
SR 4.3 system. This issue does not occur with SR 4.2 or SR 4.2.1.  
There are two potential workarounds for this issue: 
Workaround 1 
Add one broadcast session to the GQAM. 
Workaround 2 
Select manual port switching on the DNCS GQAM provisioning GUI. 
CR 96152: SDV Sessions Created by the USRM Display as VOD Sessions on the 
GQAM Web Interface 
When GQAM software version 4.2.1 is used in conjunction with USRM 1.5, SDV 
sessions are displayed as VOD unicast sessions on the GQAM web interface and 
craft port display. This issue is cosmetic only and causes no operational impact. This 
issue will be corrected in a future GQAM software release and also requires CR 
96182 to be implemented for the USRM.