Cisco Headend System Release 2.7 Installation Guide
Add and Configure the RNCS
78-4021167-01 Rev D
41
Adding a VASP
Complete these steps to add a new Value-added service provider (VASP).
1 From the ISDS Administrative Console, select the ISDS tab and then the
1 From the ISDS Administrative Console, select the ISDS tab and then the
Network Provisioning tab.
2 Click VASP. The VASP List opens.
3 Click File > New. The Set Up VASP window opens.
3 Click File > New. The Set Up VASP window opens.
4 Configure the new VASP with the following information:
Select General as the VASP Type.
Type a unique VASP ID.
Type the VASP Name.
Type the IP Address of the RNCS.
Select In Service in the Status field.
Select the RNCS Site ID.
5 Click Save.
6 Will your RNCS receive EAS messages?
6 Will your RNCS receive EAS messages?
If yes, go to step 7.
If no, go to Set Up the Remote Site (on page 42).
7 Repeat steps 3 through 5, except for the VASP Type, select mmmServer.