Cisco Headend System Release 2.7 Installation Guide
Chapter 1 Initial Installation of RNCS Software
42
78-4021167-01 Rev D
Set Up the Remote Site
Your next step is to initialize the RNCS using the siteCmd program. Follow the
instructions in Set Up the Remote Site (on page 69). Then, return to this page and
continue with Adding QPSK Modulators to the RNCS (on page 42).
CAUTION:
The installation of RNCS software will not be successful if you do not set up
The installation of RNCS software will not be successful if you do not set up
the remote site.
Adding QPSK Modulators to the RNCS
Note: Skip this procedure if your site does not use QPSK modulators.
1 From the ISDS Administrative Console, select the Network Element
1 From the ISDS Administrative Console, select the Network Element
Provisioning tab.
2 Click 55-1 QPSK. The 55-1 QPSK List window opens.