Cisco Headend System Release 2.7 Installation Guide
Add and Configure the RNCS
78-4021167-01 Rev D
43
3 Click File, select New, and then select 551-QPSK. The Set Up QPSK Modulator
window opens.
4 Follow these instructions to configure the Set Up QPSK Modulator window.
a Enter the Bridge ID.
b Enter the Hub Name of the hub associated with this QPSK.
c Enter the Name of the QPSK.
d Enter the IP Address of the QPSK.
e Enter the Return Path IP address of the QPSK.
f Enter the DHCT Reboot Log Server IP address of the QPSK.
g Enter the Frequency of the QPSK.
b Enter the Hub Name of the hub associated with this QPSK.
c Enter the Name of the QPSK.
d Enter the IP Address of the QPSK.
e Enter the Return Path IP address of the QPSK.
f Enter the DHCT Reboot Log Server IP address of the QPSK.
g Enter the Frequency of the QPSK.
Note: You may have to consult with the system operator to determine the
frequency.
5 Click Save.
6 Close the Set Up QPSK Modulator window and the 55-1 QPSK List window.
6 Close the Set Up QPSK Modulator window and the 55-1 QPSK List window.