Cisco Headend System Release 2.7 Installation Guide
Chapter 1 Initial Installation of RNCS Software
44
78-4021167-01 Rev D
Starting the RNCS
After installing and configuring the RNCS software and setting up the remote sites,
you are now ready to start the server. Complete the following steps to start the
server.
1 Open an xterm window on the ISDS.
2 Type siteCmd < hostname > lionnStart and press Enter.
1 Open an xterm window on the ISDS.
2 Type siteCmd < hostname > lionnStart and press Enter.
Note: Substitute the hostname of the RNCS for < hostname >.
3 In the xterm window on the ISDS, type siteCmd < hostname > lionnControl
and press Enter. The lionnControl utility window opens.
4 Select 2 and press Enter to view all process elements.
5 Select x and press Enter to return to the main menu of the lionnControl utility
5 Select x and press Enter to return to the main menu of the lionnControl utility
window.
6 Select 1 and press Enter to stop all processes.
Note: Wait until the Curr Stt (Current State) of all processes shows that they
have stopped.
7 Select 2 and press Enter to start all processes.
Note: Wait until the Curr Stt (Current State) of all processes shows that they are
running.
8 Follow the on-screen instructions to exit from the lionnControl utility.