Cisco Headend Digital Broadband Delivery System User Guide
1-46
Configuring SARA to Enhance Your Subscribers’ Experience
4002178 Rev C
Build and Send a Configuration to All Set-Tops in a Single Hub,
Continued
5.
From the File menu, select Open.
Result: The Set Up Hub DHCT Configuration window for the selected hub
Result: The Set Up Hub DHCT Configuration window for the selected hub
opens with the Base Application tab in the forefront.
6.
Modify the options that are available on this tab.
Note: Based on the configuration that you chose under Selecting the Options
Note: Based on the configuration that you chose under Selecting the Options
That You Want to Configure by Hub, some of the options are available for
changing, and others are dimmed and cannot be changed.
7.
Select the other configuration tabs and modify the options.
8.
Click Save when finished.
Result: The SARA Application Server sends the configuration to all the set-
Result: The SARA Application Server sends the configuration to all the set-
tops in the hub that you specified. Changes should be available on the set-top
in a few minutes.
9.
To verify that the set-top receives the changes, periodically check the set-top
for one of the more obvious changes among the settings you configured
specifically for that hub. The change should be accepted by the set-top within
a minute or two after being saved.