Cisco Headend Digital Broadband Delivery System User Guide
4002178 Rev C
Configuring SARA to Enhance Your Subscribers’ Experience
1-47
Build and Send a Configuration to All Set-Tops in a Single Hub,
Continued
Deleting a Hub-Specific Configuration
As the demands of your system change, you may need to change a hub-specific
configuration back to using a global configuration. To do that, you must delete the
hub-specific configuration for that hub.
Complete the following steps to delete a hub-specific configuration.
Complete the following steps to delete a hub-specific configuration.
1.
On the DNCS Administrative Console, select the Server Applications Tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Click Hub.
Result: The DHCT Configure Prompt window displays a list of hubs in your
Result: The DHCT Configure Prompt window displays a list of hubs in your
network.
Note: Under the Configuration column, the window specifies whether the
Note: Under the Configuration column, the window specifies whether the
hub is using a Global or Hub-Specific configuration.
4.
Highlight the hub where you want to delete the hub-specific configuration.
5.
Click File and select Delete Hub-Specific.
Result: The system prompts you whether you want to delete the hub-specific
Result: The system prompts you whether you want to delete the hub-specific
configuration.
6.
Click Yes.
Result: The SARA Application Server deletes the hub-specific configuration.
Result: The SARA Application Server deletes the hub-specific configuration.
The set-top on the affected hub should revert to the global configuration
within a minute or two.