Cisco Headend System Release 2.7 Maintenance Manual
Calculate and Change the OOB CVT Message Cycle Time
4024836 Rev D
73
8 In an xterm window, type . ./.profile to source the environment variable. Be sure
to type a space between the first two periods.
9 Type env | grep OSM and press Enter. The system displays the environmental
variables associated with the OSM process.
10 Is the OSM_RF_CVT_PASSTHRU_SECONDS included in the list and is the
setting correct?
If yes, you are finished with this procedure. Go to Bouncing the OSM Process
(on page 73).
If no, repeat this process from step 3.
Bouncing the OSM Process
After you have added the environment variable to the .profile file, you must bounce
After you have added the environment variable to the .profile file, you must bounce
(stop and restart) the OSM process.
1 If the DNCS Control window is not already open, click the Control button in the
1 If the DNCS Control window is not already open, click the Control button in the
DNCS area of the DNCS Administrative Console Status window.
Result: The DNCS Control window opens.
2 From the list of processes, click osm.
3 Click Process > Stop Process. A confirmation message appears.
4 Click Yes to stop the OSM process. This causes the indicator next to OSM to turn
3 Click Process > Stop Process. A confirmation message appears.
4 Click Yes to stop the OSM process. This causes the indicator next to OSM to turn
red.
5 From the list of processes, click osm.
6 Click Process > Start Process. The indicator next to osm turns green when the
6 Click Process > Start Process. The indicator next to osm turns green when the
osm process has successfully restarted.
7 Go to
Test the Updated OOB CVT Message Cycle Time (on page 74).