Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
© 2011 Cisco Systems, Inc. All rights reserved.
Page 56 of 103
Configuring CNR for Option 43
1. Enter configuration mode at the Cisco IOS CLI.
2. Configure ip help-address on the Video VLAN to point the CNR DHCP server
where this configuration will be done. If the DHCP server is configured on the
same VLAN where the DMPs are connected then this step is not required.
same VLAN where the DMPs are connected then this step is not required.
Interface Vlan200
ip address 10.50.1.1 255.255.255.0
ip helper-address 10.129.130.1
ß
(CNR Server)
ip pim sparse-mode
3. In CNR web interface, select the Advanced mode then select DHCPv4 >
Options.
4. Click the Add Option Definition Set button
5. Create an Option definition by giving it a Name (e.g., SVautoreg) and choose
DHCP Type DHCPv4. The Description is optional but you will have to specify a
Vendor Option String. Use “DMP4310” as the string. This string is what is sent to
the DHCP server when the DMP sends its DHCP Discover message requesting
network setting information (e.g., IP Address, Gateway, etc.)
Vendor Option String. Use “DMP4310” as the string. This string is what is sent to
the DHCP server when the DMP sends its DHCP Discover message requesting
network setting information (e.g., IP Address, Gateway, etc.)
6. Click the DHCP Option Definition Set you created and then Add DHCP Option.
Set the number to 43 and give it a name (e.g., sv_autoreg). Define this option to
use a string as its value.
use a string as its value.