Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
© 2011 Cisco Systems, Inc. All rights reserved.
Page 55 of 103
network
<ip network> <netmask>
default-router
<default-router IP address>
4. Add the Option 60 line with this syntax:
option 60 ascii DMP4310
5. Add the Option 43 line with this syntax:
option 43 ascii http://<SV Director IP Address>:8080/StadiumVision/dmp_reg
For example, to configure Option 43 for Cisco DMP 4310 with the Cisco
StadiumVision Director IP address 10.50.1.27, add this line to the DHCP pool in the
Cisco IOS CLI:
StadiumVision Director IP address 10.50.1.27, add this line to the DHCP pool in the
Cisco IOS CLI:
option 43 ascii http://10.50.1.27:8080/StadiumVision/dmp_reg
Note: The Cisco IOS DHCP server is limited to one Option 43 for each DHCP pool,
so you can only configure a DHCP scope for a single device type. This should not
pose a problem since the recommendation is to use separate VLANs per service.
For example, Video VLAN for DMPs, Voice VLAN for IP phones, and Wireless
VLAN for APs.
so you can only configure a DHCP scope for a single device type. This should not
pose a problem since the recommendation is to use separate VLANs per service.
For example, Video VLAN for DMPs, Voice VLAN for IP phones, and Wireless
VLAN for APs.
IOS documentation calls for the URL to be enclosed in double quotes (“). In the
case of SV this is not required as there are no spaces in the URL. Furthermore, a
bug in certain versions of IOS causes the quotes to be treated as if they are part of
the URL. Hence it is recommended to not use quotes.
case of SV this is not required as there are no spaces in the URL. Furthermore, a
bug in certain versions of IOS causes the quotes to be treated as if they are part of
the URL. Hence it is recommended to not use quotes.