Cisco Cisco StadiumVision Mobile Streamer Quick Setup Guide
To view media player device status, complete the following steps:
1. To get the most recent device status, run the Get Status command from the
Management Dashboard:
a. Go to:
DMP and TV Controls > Monitoring > Get Status
b. In the Select Devices panel, select the devices that you want an updated
status for.
c. To execute the command, click the play (>) button located at bottom left of the
panel.
2. In the Device List panel, select the device that you want to verify.
3. Go to the device details area at the bottom of the panel and click Status.
Use the buttons on the Status panel to obtain more details about the media
Table 39. Management Dashboard Status Panel Buttons
Button
Description
Status Details
Displays a combination of device details for both the
media player and its associated TV displays.
Utilization
Displays media player-specific resource information such
as CPU usage, memory, and disk storage.
NOTE: The CPU Usage and Memory display areas
only apply to the Cisco DMP 4310G.
Events
Displays system events that pertain to media players.
Uptime
Displays information about how long the device has been
running.
NOTE: The Flash fields only apply to the Cisco DMP
4310G.
MIB Variables
Displays internal settings for the media player.
NOTE: When using the dmp.monitorPower display parameter,
you can run the Get Status command from the Management
Dashboard to get the latest TV health status known to the DMP.
This information can be up to two minutes old, or a few seconds
depending on when the power query last ran. If the
“dmp.monitorPower” parameter is set to false then you will not
get the correct TV health status.
© Cisco Systems, Inc. All rights reserved.
307 of 331