Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
© 2011 Cisco Systems, Inc. All rights reserved.
Page 58 of 76
Chapter 4 Operations
With regard to local TV control and ordering, once the services have been
implemented, the operation is largely performed by the end user. This chapter
provides information about how to use the Cisco IP Phone to access the
StadiumVision services. For information about how to use a third-party device (such
as AMX or Crestron), please contact the third-party integrator.
implemented, the operation is largely performed by the end user. This chapter
provides information about how to use the Cisco IP Phone to access the
StadiumVision services. For information about how to use a third-party device (such
as AMX or Crestron), please contact the third-party integrator.
When guests arrive at their luxury suite in a venue, they should see a welcome
message on one of the TVs (similar to that shown in Figure 6). It is recommended
that the welcome screen instruct them to use the Cisco IP Phone to control the TVs
located in their suite.
message on one of the TVs (similar to that shown in Figure 6). It is recommended
that the welcome screen instruct them to use the Cisco IP Phone to control the TVs
located in their suite.
Initially, the Cisco IP Phone will display
the “home” screen (as configured using the
CUCM idle timer).
TV Control
In a luxury suite, the Cisco Unified IP Phone 7975 can be used to control the TVs
and to place calls. It has a touch screen, softkeys (which change depending on the
screen contents), a navigation pad, and a phone keypad.
and to place calls. It has a touch screen, softkeys (which change depending on the
screen contents), a navigation pad, and a phone keypad.