Cisco Model D9479 Gigabit QAM Modulator Installation Guide
Chapter 2 Upgrading the Software
16
78-4024239-01 Rev B
9 Complete one of the following options:
If the File Manager is present: From the File Manager window, click File
and select Eject. The CD is ejected from the CD drive and the File Manager
window closes.
If the File Manager is not present: From an xterm window, type the
following command: cd /.; eject; exit. The CD is ejected from the CD drive.
10 Type exit and press Enter to close the xterm window.
11 Go to
11 Go to
Establish a Download Sequence (on page 18).
Installing the GoQAM Software from the Cisco FTP Server
Creating the Directory
1 From the xterm window where you are logged in as root, type
1 From the xterm window where you are logged in as root, type
cd /export/home/dncs/download and press Enter. The
/export/home/dncs/download directory becomes the working directory.
Important: If this directory does not exist, use the mkdir command to create it.
Important: If this directory does not exist, use the mkdir command to create it.
Then, repeat step 1.
2 Type mkdir GoQAM113 and press Enter. The system creates a subdirectory
called GoQAM113 in the /export/home/dncs/download directory.
3 Type cd GoQAM113 and press Enter to access the GoQAM113 directory.
4 Go to
4 Go to
Obtaining the GoQAM Software File (on page 16).
Obtaining the GoQAM Software File
1 Log on to the Cisco FTP server.
1 Log on to the Cisco FTP server.
Notes:
The address of the server is ftp.sciatl.com or 192.133.243.133.
Note: The address for the Cisco FTP server is subject to change. If you are
Note: The address for the Cisco FTP server is subject to change. If you are
unable to reach the FTP server, please contact Cisco Services for the latest
address.
The username is anonymous.
The password is the e-mail address of the person logging in.
2 Choose one of the following options to navigate to the directory in which the file
is located:
If you are outside the firewall, type cd /pub/scicare/RELEASED/GoQAM
If you are inside the firewall, type
cd /external_pub/scicare/RELEASED/GoQAM
3 Type bin and press Enter. The system sets the ftp transfer mode to binary.
4 Type hash and press Enter. The system configures itself to display hash marks
4 Type hash and press Enter. The system configures itself to display hash marks
that show file-transfer progress.
5 Type prompt and press Enter. The system indicates that interactive mode is off.