Cisco Cisco Prime Collaboration Manager 1.2 Installation Guide
2
Video SLA Assessment Agent 3.1 Installation Guide
System and USB Drive Requirements
System and USB Drive Requirements
You can install VSA Agent 3.1 on the USB drive only.
lists system and USB drive requirements
for running the VSA Agent software.
Note
The display driver, USB driver, and Intel Chipset Device Software on the system must support the Fedora
Linux operating system. See
Linux operating system. See
and USB drives.
Port Requirements
lists the ports that VSA Agent uses. These ports must be open in both directions on the source
and destination systems on which VSA Agent is installed.
Table 1
System and USB Drive Requirements
Parameter
Requirement
Processor
Intel Pentium 4 or higher
CPU speed
2 GHz or higher
RAM size
2 GB minimum
Ethernet
1 Gig
Swap size
Not required.
Disk space
Not required; VSA Agent runs from the USB drive.
USB flash drive
16 GB to 32 GB
Note
Do not use a USB drive with more than 32 GB of
memory.
memory.
USB version
2.0
USB port on the system
2.0
Recommended USB
manufactures
manufactures
•
Kingston
•
Patriot
Note
Do not use partitioned USB drives, such as SanDisk
USB drives, for VSA agent installation.
USB drives, for VSA agent installation.
Table 2
Port Requirements
Port Number
Protocol
22
TCP
80
TCP
123
UDP
5060
TCP
8080
TCP