Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 73 of 169
Chapter 4
Managing Logs, Events, and Faults
This chapter provides procedures for managing Prime Network Services Controller management logging.
This chapter includes the following sections:
●
●
●
●
●
Working With Management Logs
This section includes the following topics:
●
●
●
●
Setting Log Severity Levels and Log Size
You can set the log severity level and log size.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
SUMMARY STEPS
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can also perform the set command in the management controller CLI. Each
CLI allows you to control a different set of logs.
CLI allows you to control a different set of logs.
2. scope monitoring
3. scope sysdebug
4. scope mgmt-logging
5. set [ all { crit | debug0 | debug1 |debug2 | debug3 | debug4 | info | major | minor | warn } | file size
<size> | module <Name> { crit | debug0 | debug1 |debug2 | debug3 | debug4 | info | major | minor |
warn } ]
warn } ]