Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
l
The template in use and the corresponding content must match the signal
resolution.
To set the resolution for a display, complete the following steps:
1. Go to Control Panel > Setup > Devices > Display Specifications.
2. Select the TV that you want to configure.
3. Click Serial Commands.
4. Find the sv4k.videoMode command (
).
Figure 24. SV-4K Resolution Setting in Display Specifications
5. Specify one of the values in
according to the desired resolution
behavior.
Table 11. SV-4K Resolution Values
sv4k.videoMode Value
Resolution
1920x1080x60p
Fixed at 1080p
1280x720x60p
Fixed at 720p
Not Configured
Auto-detected
Auto
Auto-detected
6. Click Save.
7. Reboot the SV-4K device.
82 of 285
© Cisco Systems, Inc. All rights reserved.