Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
Clearing Registries on the SV-4K Media Player by
Restoring Factory Defaults
Restoring Factory Defaults
If you need to clear the registry settings on the SV-4K and reprovision the SV-4K, use
the Restore Default Settings command.
To clear the registries on the SV-4K media player, complete the following steps:
1. Go to the Management Dashboard.
2. Select the SV-4K devices that you want to clear.
3. Go to DMP Install > Restore Default Settings.
4. Click Play.
Any persistent device settings on the SV-4Ks are erased and the box will be in
factory default state. The SV-4K automatically reboots and reprovisions its
firmware and settings.
Recovering SV-4K Operation After Server Power Loss
User Roles
Installer (Administrator)
If the Cisco StadiumVision Director server should lose power while the SV-4K devices
remain powered, you will need to recover the SV-4K devices after power is restored to
the server.
To recover SV-4K operation after server power loss, complete the following
steps:
steps:
1. Restore power to the Cisco StadiumVision Director server.
2. Reboot the SV-4K devices.
IMPORTANT: If for some reason you needed to restore the SV-
4K operation to a new Cisco StadiumVision Director server (not a
failover operation), then you would need to change the DHCP
server option 43, reconfigure the new server for auto-provisioning
of the SV-4K, and reboot the SV-4K devices similar to a new
deployment of the SV-4K devices. For more information, see the
© Cisco Systems, Inc. All rights reserved.
271 of 285