Cisco Cisco TelePresence MCU 4510 Installation Guide
Task 1: Add a SIP trunk to MCU for Rendezvous conferences (and to
receive TelePresence MCU out-dialed calls)
receive TelePresence MCU out-dialed calls)
To configure a SIP trunk to the MCU:
1. Go to
Device > Trunk
.
2. Click Add New to create a new SIP trunk.
3. Enter the following into the relevant fields:
Trunk Type
Select SIP Trunk.
Device Protocol
Leave as default: SIP.
Trunk Service Type
Leave as: None(Default).
4. Click Next.
5. Enter the following into the relevant fields, leave other fields as their default values:
Device Name
Enter a trunk name.
Device Pool
Select the appropriate Device Pool.
Location
Set to the appropriate location.
TelePresence MCUs IP address
Enter the MCU's IP address.
SIP Trunk Security Profile
Select Non-secure SIP Trunk Profile from the drop-down list.
SIP Profile
Select Standard SIP Profile for TelePresence Conferencing
Cisco TelePresence MCU Deployment Guide 4.4
Page 47 of 53
Deploying an MCU as a Unified CM media resource