Cisco Cisco TelePresence MCU 4510 Installation Guide
6. Click Save.
7. Click Reset.
Task 2: Add a route pattern to match the SIP trunk to TelePresence MCU
for Rendezvous meetings
for Rendezvous meetings
To configure a route pattern to match the SIP trunk to the TelePresence MCU for Rendezvous calls:
1. Go to
Call Routing > Route/Hunt > Route Pattern
.
2. Click Add New to create a new route pattern.
3. Enter the following into the relevant fields, leave other fields as their default values:
Route Pattern
Enter a route pattern to match against the destination string.
Gateway/Route List
Select the trunk created in the previous step.
Cisco TelePresence MCU Deployment Guide 4.4
Page 48 of 53
Deploying an MCU as a Unified CM media resource